Aerauliqa Quantum HR 100
Code: AE000468
Product detailed description
The Aerauliqa Quantum HR 100 is a decentralized heat recovery unit (push-pull) with a ceramic exchanger and EC motor for ventilating a single room, with an average diameter of 100 mm.
Casing
The Aerauliqa Quantum HR 100 local heat recovery unit has an inner section and base made of high-quality ABS, a flat UV-resistant front panel (RAL 9010) and a telescopic pipe Ø110 mm for wall thicknesses of 300–570 mm; front cover 164 × 164 mm, weight 2.3 kg. An external grille with an insect screen is included.
Fans
The Aerauliqa Quantum HR 100 local heat recovery unit uses an alternating ‘push-pull’ mode with a ~70s cycle; impeller with winglet design for quiet and efficient operation.
Motor
The Aerauliqa Quantum HR 100 local heat recovery unit is equipped with a reversible EC motor with integrated thermal protection and ball bearings for continuous operation; double insulation does not require grounding.
Recuperation
The Aerauliqa Quantum HR 100 local recuperation unit uses a ceramic core with an efficiency of up to 82% (typically 70/74.3/82% depending on speed) and supports free cooling without heat transfer.
Filter
The Aerauliqa Quantum HR 100 local heat recovery unit has washable dust filters on both sides of the exchanger for easy maintenance.
Electrical connection
Aerauliqa Quantum HR 100 local heat recovery unit: power supply 220–240 V ~ 50 Hz, IPX4 protection, operating temperature −20 to +50 °C, power consumption 1.2/1.7/2.6 W depending on speed.
Control
The Aerauliqa Quantum HR 100 decentralized heat recovery unit offers 3 speeds, control via a standard switch or optional wall panel; automatic boost via SEN-HY (humidity) and SEN-PIR (motion) sensors, option to synchronize multiple units and IR controllers for paired operation.
Noise
The Aerauliqa Quantum HR 100 local heat recovery unit achieves a noise level of 29/15/10 dB(A) at 3 m (V/St/N); acoustic power LWA 35 dB(A).
.jpg){kind=icon}
Installation
The Aerauliqa Quantum HR 100 local heat recovery unit is installed through an opening in the perimeter wall; it is typically installed in pairs with phase-shifted synchronization for balanced airflow. The front panel dimensions are 164 × 164 mm, and the duct length is 300–570 mm.
Accessories
The Aerauliqa Quantum HR 100 decentralized heat recovery unit supports a wall-mounted control panel, SEN-HY and SEN-PIR sensors, and an infrared controller for joint control of two units.
Instructions
The Aerauliqa Quantum HR 100 local heat recovery unit has a magnetic connection for quick removal and cleaning; an LED indicates the free cooling mode. Clean the filters and grille regularly.
Warning
The Aerauliqa Quantum HR 100 local heat recovery unit must be installed by a qualified person; ensure a suitable zone with regard to IPX4, observe the wall thickness of 300–570 mm and the 230 V power supply.
Additional parameters
| Category: | Aerauliqa Quantum HR - decentralized heat recovery units |
|---|---|
| Warranty: | 2 years |
| Weight: | 2.3 kg |
| EAN: | 8058647113869 |
| Maximum temperature [°C]: | 50 |
| Duct diameter [mm]: | 110 |
| Thermal efficiency [%]: | 70 / 74,3 / 82 |
| Airflow [m3/h]: | 10 / 15 / 25 |
| Sound level [dB(A)]: | 10 / 15 / 29 |
| Input power [W]: | 1,2 / 1,7 / 2,6 |
Be the first who will post an article to this item!